Pillow Block Bearings

Contact Now

Pillow block bearing units provide stability and self-alignment for many different applications. Adjustment of a misaligned shaft can occur in any direction and allows centering and alignment without distorting seals. Pillow block bearing units include a hollow set screw for easy and firm attachment on a shaft and a one-piece housing for structural strength. Grease nipples and holes supply lubricating grease to the bearing and maintain the flow of grease to balls and raceways. Rubber seals located between the inner and outer rings prevent lubricants from leaking and protect against contaminants.Pillow blocks, the most commonly used type of mounted units, are designed to provide shaft support where the mounting surface is parallel to the shaft axis. The bolt holes are usually slotted for adjustment during mounting. Pillow blocks are supplied in a variety of configurations. Pressed steel pillow block bearings are also available for light-duty applications.Check out our selection of high quality pillow block bearings listed below. We are always updating and adding sizes and styles. So be sure to refer to this page often.

3.438 Inch | 87.325 Millimeter x 5.063 Inch | 128.59 Millimeter x 5 Inch | 127 Millimeter REXNORD ZPS9307F Pillow Block Bearings

1 mm 54.5 mm
8.76 Hz 7,600 rpm

4.938 Inch | 125.425 Millimeter x 7.938 Inch | 201.625 Millimeter x 6.125 Inch | 155.575 Millimeter REXNORD ZPS6415F Pillow Block Bearings

N/A 0.945 Inch | 24 Mill
C0-Medium Steel

2.188 Inch | 55.575 Millimeter x 3.344 Inch | 84.938 Millimeter x 3 Inch | 76.2 Millimeter REXNORD ZPS9203 Pillow Block Bearings

Yes Setscrew
Steel 206 Series

2.188 Inch | 55.575 Millimeter x 3.344 Inch | 84.938 Millimeter x 3 Inch | 76.2 Millimeter REXNORD ZPS9203F Pillow Block Bearings

4.84 Hz CN
1.27 kN -25 °C

2.938 Inch | 74.625 Millimeter x 4.531 Inch | 115.09 Millimeter x 3.5 Inch | 88.9 Millimeter REXNORD ZPS6215F Pillow Block Bearings

191.2 mm H3026
3,000 rpm 200 °C
1/12